COMMERCIAL PLATFORM LIFTS

Compliant with Australian standards for low rise lifts AS 1735.14

The perfect solution for commercial projects, multi residence developments or retrofitting to an existing commercial building

ASCENSA 1m Lift

The Ascensa is the most popular low rise platform lift suitable for commercial projects with a maximum rise of up to 1.0 metre.
Compliant with Australian standards for low rise lifts AS 1735.14

Meets the requirements of the Disability (Access to Premises – Buildings) Standards 2010, Disability Discrimination Act 1992 (DDA)

  • Indoor or Outdoor
  • Continues to operate during power failures
  • Straight through or adjacent entry/exit
  • Emergency Telephone
  • Interlocked upper landing gate
More Information and Specifications

Standard Features on Ascensa lifts

  • Suitable for indoor or outdoor environments
  • Can be installed in a 60mm deep pit or fixed directly onto a concrete slab or timber flooring, if no pit is available
  • Straight through entry/exit or adjacent entry/exit configuration
  • Platform lift controls – tactile & braille buttons
  • On/off key switch
  • Emergency phone
  • Wall mounted landing call buttons (optional wireless)
  • Safety edges – stop the lift travelling if activated
  • Platform handrails
  • Power failure battery back-up – lift continues running in the event of power failure
  • Emergency manual lowering valve
  • Emergency stop button and audible alarm
  • Anti entrapment blind to secure the underside of the lift
  • Frame & lift body in powder coated Ghost Grey duralloy finish
  • Interlocked upper landing gate – manual opening & self closing
  • Platform barrier arm & automatic retractable ramp
  • Glass wall on side of platform

Options

  • Lift body in Dulux powder coat colour range
  • Lift body in stainless steel
  • Interlocked platform gate – manual opening & self closing
  • Automatic opening & closing landing gates and platform gates
  • Landing call bollards
  • Lift shaft walls

Other options as specified by clients – contact Lift Me to discuss

Technical Specifications

  • Maximum weight capacity: 340Kg or 500Kg
  • Platform size: 1100mm x 1400mm
  • Maximum speed: 0.03 m/sec
  • Sub frame/column: Arc spray zinc/galvanised – mild steel
  • Lift body, car wall & gates: Zinc shield zintex & powder coat or option stainless steel
  • Platform: 3mm Aluminium tread plate, or as requested
  • Power: 230-240V, 50Hz, single phase, 0.5 Amp
  • Control operating voltage: 24 V DC
  • Placement: Surface mounted or 60mm pit (concrete pad or timber floor)

ASCENSA GALLERY

EXTOLLO 1.5m Lift

The Extollo is suitable for commercial projects with a maximum rise of up to 1.5 metres
Compliant with Australian standards for low rise lifts AS 1735.15

Meets the requirements of the Disability (Access to Premises – Buildings) Standards 2010, Disability Discrimination Act 1992 (DDA)

  • Indoor or Outdoor
  • Continues to operate during power failures
  • Straight through or adjacent entry/exit
  • Emergency Telephone
  • Platform and upper landing gate
More Information and Specifications

Standard Features on Extollo lifts

  • Suitable for indoor or outdoor environments
  • Can be installed in a 60mm deep pit or fixed directly onto a concrete slab or timber flooring, if no pit is available
  • Straight through entry/exit or adjacent entry/exit configuration
  • Platform lift controls – tactile & braille buttons
  • On/off key switch
  • Emergency phone
  • Wall mounted landing call buttons (optional wireless)
  • Safety edges – stop the lift travelling if activated
  • Platform handrails
  • Power failure battery back-up – lift continues running in the event of power failure
  • Emergency manual lowering valve
  • Emergency stop button and audible alarm
  • Anti entrapment blind to secure the underside of the lift
  • Frame & lift body in powder coated Ghost Grey duralloy finish
  • Interlocked upper landing gate – manual opening & self closing
  • Interlocked platform gate – manual opening & self closing
  • Glass wall on side of platform

Options

  • Lift body in Dulux powder coat colour range
  • Lift body in stainless steel
  • Automatic opening & closing landing gates and platform gates
  • Landing call bollards
  • Lift shaft walls

Other options as specified by clients – contact Lift Me to discuss

Technical Specifications

  • Maximum weight capacity: 340Kg or 500Kg
  • Platform size: 1100mm x 1400mm
  • Maximum speed: 0.03 m/sec
  • Sub frame/column: Arc spray zinc/galvanised – mild steel
  • Lift body, car wall & gates: Zinc shield zintex & powder coat or option stainless steel
  • Platform: 3mm Aluminium tread plate, or as requested
  • Power: 230-240V, 50Hz, single phase, 0.5 Amp
  • Control operating voltage: 24 V DC
  • Placement: Surface mounted or 60mm pit (concrete pad or timber floor)

EXTOLLO GALLERY